CS932 CS933 Hand held instruments temperature conductivity salinity TDS, ions/ mV pH dissolved oxygen pH mV multimeter with data storage.


You can purchase online where you see the check mark		Click on the assistant to view the contents of your shopping cart


Conductivity / Salinity / TDS/ Temperature/ pH / mV / ion /Dissolved Oxygen Multi-meter

	Features of the C93X series Electrochemistry meters Multi Parameter Analyzer for pH, DO, salinity, conductivity, resistivity, TDS, ions, mV and temperature Built in help keys guide you through operation *Stores up to 3600 measurements or log continuously to a PC* Recorder output Free Windows Software Rechargeable batteries and adaptor Optional Auto power adapter Password protection Time and Date IP 65 splash proof 3 year warranty

Multimeters for pH/Conductivity/salinity/DO/mV/Temp

This high resolution, electrochemistry meter does it all conductivity / salinity/ TDS/ pH / DO/ mV/ion and temperature meter with powerful set up options, Windows software and a host of other features which make it easy to use for almost any application in the field or in the lab. Includes data logger for storing up to 3600 readings. Kits come complete with electrodes, supplies, batteries instructions and carrying case. Various combinations available (see below) for of pH, mV, conductivity, salinity, dissolved oxygen and temperature. The meter will work with any standard pH electrode, 2 electrode conductivity cell, Pt1000 or Pt100 thermometer. (note that DO probes from other manufacturers are not readily interchangeable between meters. The CS932 uses a galvanic probe)

Model Specification Multi Parameter meter

Modes		Resolution
conductivity cell constant 1	0 - 0.001 uS/cm - 20 mS/cm	0.001 uS/cm
cell constant 0.1	0.01 uS/cm - 200mS/cm
cell constant 10	0.1 uS/cm - 2000 mS/cm
Resistivity
cell constant 0.1	100 Ohm.cm	1 Ohm.cm
cell constant 1	10 Ohm.cm
cell constant 10	1 Ohm.cm
TDS
cell constant 0.1	0.01 mg/l - 20 g/l	0.01 ng/l
cell constant 1	0.01 mg/l - 100 g/l
cell constant 10	0.1 mg/l - 100 g/l
Salinity	0 - 70 ppt	0.1 ppt
Degs C	- 30 to + 130	0.1 deg. C
pH
Range	- 2 - 16	0.001 pH
mV	+/- 2000 mV	0.1 mV
Dissolved Oxygen
Range	0 - 60 mg/l	0.01 mg/l, 0.1% O2
Saturation	0-600%
Compensation	Air Pressure Salinity Temperature
Inputs
Electrodes	BNC
Temperature	Banana

Accuracy
Conductivity/O2	1% of reading
pH mV	0.2% of reading
Temperature Compensation
Conductivity/pH/mV	0 - 100 C automatic or manual
Oxygen	0 - 50 C auto
Calibration
Cell Constant	0.1, 1.0, 10.0
Temp Coeff	NaCl Curve
Standards	3 pre programmed
Ref Temp	20 or 25 degs C
Temperature	+/ 10 degs C
pH Buffers	9 pre-programmed
ISO pH	6 - 8 pH
Slope	80...120%
mV	+/- 100 mV
Oxygen	1 points
General Specifications
Memory	200 values
Display	122 x 32 pixels LCD
Power	Batteries 4 x 1.5 V alkaline DC line 9 - 15 V
Dimensions	10 x 20 x 4 cms
Weight	400 g

General Specifications

GLP protocol	Built in
Display Hold	Included
Plotter	1800 - 3600 points
Recorder output	0 - 2 volts
RS232	Baud rate - 300 to 9600 bps, bi-directional interval 1 - 9999 s
Power Supply
AC line	110/220V 50/60Hz
DC line	9 - 15 Volts DC
NiMH batteries	4 x 1.2 Volts AA size
Dimensions	12 x 25 x 5 cms
Weight	600 g

Ordering Information C93x series

order onlin e -

Model CS-C931 pH mV conductivity resistivity salinity TDS and temperature - meter only	$550.00
Model CS-C931T kit with electrodes (epoxy) and solutions	$920.00

Model CS-C932 pH mV conductivity resistivity salinity TDS and temperature air pressure & Dissolved Oxygen - meter only	$750.00
Model CS-932T kit with electrodes and solutions	$1250.00

Model CS-C933 pH mV ion conductivity resistivity salinity TDS temperature air pressure Dissolved Oxygen - Meter only	$995.00
Model CS-C933T Kit with electrodes and solutions	$1695.00

CSC932Z Dissolved oxygen kit meter, probe and solutions	$1150.00

Other ph Electrodes here, ISE electrodes here

Features of the C93X series Electrochemistry meters