Asahi Digital Panel Meters and
Instruments
 
Digital panel meters from Asahi Keiki offer impressive specifications, 
reliability and low cost for a variety of application

*Click here for Transmitters*
DPMs instruments and transmitters Digital Thermometer

Counter Tachometer & Frequency
Transmitters

Strain Gauge 


Process Monitor
Product Range
We carry a large range of products from Asahi Keiki not all of which are on our web site yet. If you don't see what your looking for on this site please contact us. The list below is an overview of the product types with links detailed web pages and online ordering. 
DC Voltmeters and Ammeters Back to top
200mV - 200Volts Ranges Digital
Out-
put
Analog
out
Digits Power
A-2100 replaces AP200 Voltage and Current basic low cost 1/32 DIN. 10.16 mm red LED NO NO 3.5 DC 5V non isolated
DC5-24V isolated
A-2220 DC Voltage basic low cost 1/32 DIN. 10 mm red LED NO NO 4.5 DC 5 - 24V Isolated
AP-101 voltage or Current  14.2 mm LED, CE mark 800V option  NO NO 3.5 AC/DC
A1000 voltage or Current  14.2 mm LED
1/8 DIN shallower than AP101
    3.5 AC/DC
AP-540 Voltage, 200 mV to 200V,
Thin case.
NO   NO 4.5 DC 5V non isolated $199.00
AP-142 (replaced by A9000) Voltage, 200 mV to 200V, 700V option BCD NO 4.5 AC/DC
AP-201A Voltage, 1/32 DIN 10.2mm red LED low cost NO NO 3.5 DC5V non-isolated $89.00
AP-202A Discontinued see A8000 for BCD A2200 for display range Voltage, current 1/32 DIN, 2.5 or 12.5/sec conversion. rate BCD   3.5 DC
AP-301 Voltage, thin case, options 4-20mA, scaling, range select NO NO 3.5 DC 5V
AP-341 voltage 14.2mm Red LED BCD   4.5 AC
AP-501A voltage only, thin case 14.2 mm red LED     3.5 DC 5V
AP-502  voltage, current thin case 14.2 mm red LED     3.5 DC 5V
AP-520A voltage thin display 12.7mm LCD      3.5 DC 5V
AH-231 Voltage, open case small size easy installation     3.5 DC 5V
A5000 Modular DC and AC voltage and current, and process controller
96 x 48 x 147.5mm
RS232
RS485
YES 4 AC/DC
A6000 DC and AC Voltage /Current
96 x 48 x 97.5
RS232
RS485
YES 4 AC/DC
A7000 DC/AC Voltage/Current
72 x 36 x 118mm
RS232
RS485/BCD
YES 4 AC/DC
A8000 DC and AC voltage, current, and process control and temperature
48 x 24 x 96mm
BCD   4.5 DC 5 to 12V
DC 12 to 24V
A9000 DC, voltage, current, and process controller
96 x 48 x 75mm
BCD   4.5 AC 100-240V
DC 5 to 12V
DC 12 to 24V
20mV - 200V          
AP102 DC voltage and Current BCD   3.5 AC/DC
2V - 200V Ranges        
AP-141 4.5 digits voltage 700V option     4.5 AC/DC
AP-244 Discontinued see A8000 for BCD A2100 for display range 4.5 digits voltage,  1/32 DIN 8mm red LED BCD   4.5 DC 5/24V
100 mV - 2V Ranges        
AH-330
AH-331
voltage, uncased voltmeters 3 and 3.5 digits     3.5 DC 5V
200 mV - 2 volt        
AH-381 3.5 digits voltage, LCD, open case     3.5 DC 5V
1V - 10V ranges        
APH-114  4 digits voltage and ,high conversion rate 100/sec, 4-20 mA BCD        
AC Voltmeters and Ammeters Back to top
A8000 Modular DC and AC voltage and current, and process controller
48 x 24 x 96mm
BCD NO 4.5

DC 5-12V
12-24 V

A5000 Modular DC and AC voltage and current, and process controller
96 x 48 x 147.5mm
RS232
RS485
YES   4 AC/DC
A6000 DC and AC Voltage /Current
96 x 48 x 97.5
RS232
RS485
YES 4 AC/DC
A7000 DC/AC Voltage/Current
72 x 36 x 118mm
RS232
RS485/BCD
YES 4 AC/DC
A1000 voltage or Current  14.2 mm LED
1/8 DIN shallower than AP101
96 x 48 x 53 mm
NO NO 3.5 AC/DC
AP560 AC voltmeter loop powered thin case 14.2 mm red LED NO NO 3 AC Loop powered
AP160 (discontinued see A5000) AC voltmeter - line 3.5 digit AVG. 14.2 mm red LED     3.5 AC
AP-162A replaced by AP 168 below     4 AC
AP-166(discontinued see A5000) 4.0 Digits AVERAGE     4 AC
AP168(discontinued see A5000/A6000) AC voltmeter/ammeter 4 digit true RMS with BCD & analog   BCD   4 AC
AM-164A 4 digits True RMS, HI LO comparator set points     4 AC
AP-246 discontinued see A8000 4 digits 1/32 DIN Average     4 DC 24V
AP-247 discontinued see A8000 4 digits 1/32 DIN true RMS     4 DC 24V
Process Monitors
1 - 5 Volts, 4 - 20 mA, 3 1/2, 4 1/2 digit A,V, Set point
Back to top
A9000 DC, voltage, current, and process controller
96 x 48 x 75mm
BCD   4.5 AC 100-240V
DC 5 to 12V
DC 12 to 24V
A8000 Modular DC and AC voltage and current, and process controller
48 x 24 x 96mm
BCD NO 4.5 DCDC 5 to 12V
DC 12 to 24V
A5000 Modular DC and AC voltage and current, and process controller
96 x 48 x 147.5mm
 yes  yes 4 AC/DC
A6000 DC and AC Voltage /Current
96 x 48 x 97.5
RS232
RS485
YES 4 AC/DC
A7000 DC/AC Voltage/Current (72 x 36 x 118mm) RS232
RS485/BCD
YES 4 AC/DC
AS-103A           
AS-104 process monitor with excitation power supply     4  
AS-101 Digital scaling meter.     4  Refer to Spec. sheet.
A1000 voltage or Current  14.2 mm LED
1/8 DIN shallower than AP101
    3.5 AC/DC
AS-143A Easy adjustable offset-full scale from the front panel, Leading zero & last digit suppression  yes  yes 5  90 -132VAC
180 -264VAC
24VDC
AS-144 Offset adjustable +/- 1000, Leading zero & last digit suppression, Span range 2000 counts  yes   5  90 -132VAC
180 -264VAC
AS-154 10 year EEPROM backup, Bar gragh, selectable output option  yes  yes 4  90 -132VAC
 
AS-203A Easy adjustable offset-full scale from the front panel      4 DC5V +/- 5%
DC24V +/-20% 
AS-201 Easy adjustable full scale      4 DC5V +/- 5%
AL-501A Easy adjustable offset-full scale from the front panel, Self power 4 ~ 20 mA      4 Current loop power
AL-213 Self power 4 ~ 20 mA      4 Current loop power
AS-105 Offset adjustable +/- 1000, HI and LOW set point, Full scale adjustable 200~1999     4 24VDC 12VDC available
AL-512 Self power 4 ~ 20 mA, screw terminal      4 Current loop power
AS-243 Easy adjustable offset-fullscale (span 10000)     4 24VDC (isolated)
Set point Comparators Back to top
A5000 A5000 modular meter with options for set point, analog and digital outputs (96 x 48 x 147.5mm) RS232
RS485
0-1V
0-10V
1-5V
4-20mA 
4 AC/DC
 DC and AC voltage and current, and process controller
A5000 temperature - thermocouples and RTD inputs
A5000 tachometer
A6000 DC and AC Voltage /Current (96 x 48 x 97.5) RS232
RS485
YES 4 AC/DC
DPM - 3 1/2 and 4 digit comparators with 1, 2 or 4 setpoints, RS232 and high conversion rate options        
A8000 Modular DC and AC voltage and current, and process controller (96 x 48 x 147.5mm) BCD   4.5 DC
AM147 4 set point 100mV to 700V RS232 output, 4 digits BCD
RS232
RS485
4-20ma
0-10V
4 AC
AM-211A DC voltage one set point analog comparator small 1/32 DIN. - - 3.5 DC 5V
AM-212  DC Volts/current, 1-5V, 4-20mA 2 set points small 1/32 DIN. - - 3.5 DC 24V
AM-213  NEMA 4, HI, LO set points, 4 digit, 1/32DIN, CE mark.   4-20ma 4 DC 24V
AM-215 Measurement/input/scaling range: ±99.99 mV, ±999.9 mV,
±9.999 V, 1 to 5 V, 4 to 20 mA
RS485 4-20 mA 4 DC24V
AM-749 4 set point comparator voltage/current analogue/digital output options RS232
RS485
4-20ma
1-5V
5 AC
AMH-752 DC Voltage/Current & 1-5V, 4-20mA, high speed 4000 c/sec conv. rate, 2 input,  RS232 ±2.5V 3.5 AC
AMH-763 4000 c/sec conversion rate,
2 input computation 4 digit
8 functions
BCD
RS232
RS485
USB
Analog
4-20ma
1-5V
1-10V
5 AC
AMH-133 100c/sec 4 digit no data outputs.         
AM-342 4 set points no data outputs, 4 digit         
AM-346 4 set point, RS232, RS485 4 digits BCD
RS232
RS485
  4  
Digital Thermometers Back to top
A1000 K,J RTD: PA, PJ
96 x 48 x 53 mm
NO
NO
4 AC/DC
A5000  K, J, T, Pt100  temperature - thermocouples or RTD inputs (96 x 48 x 147.5mm) RS232
RS485
YES
 4  AC/DC
A6000 Thermocouple (96 x 48 x 97.5) RS232
RS485
YES 4 AC/DC
A7000 Thermocouple (72 x 36 x 118mm) RS232
RS485/BCD
YES 4 AC/DC
A8000 Modular DC and AC voltage and current, and process controller
48 x 24 x 96mm
BCD NO 4.5 DC 5 to 12V
DC 12 to 24V
AT-801 replaced by A5000  Sensor types, K, J, PT- 100ohm  
 yes
 4  90 -132VAC
180 -264VAC
AT-803 replaced by A5000 Sensor types, K, J,T, R, PT- 100ohm,
Selectable Sensor,
Selectable C, F display
Provided sensor compensate function.  
 yes
 yes
 4  90 -132VAC
180 -264VAC
AT-205 replaced by 4000 series Thermometer meter TC and RTDs  
   
AT-216 Sensor types K,J,T,R,PT 100ohm  
 yes
   24VDC +/- 20%
Counters Tachometer and Frequency Meters Back to top
AC-116A Leading zero suppression, Latch terminals, sensor power supply, Excitation power supply and optional backup battery.        90 -132VAC
180 -264VAC
AC-150A Frequency range 
20 ~ 999.9Hz
200 ~ 9999Hz
      90 -132VAC
180 -264VAC
AC-962A, 963A
E2PROM, 12VDC Sensor power, Analog, BCD open collector option, Reciprocal counting system, Input Freq. .1Hz ~ 20KHz
 yes
 yes
   90 -264VAC
50/60Hz
A5000 6 digit totalizing, 4 digit frequency, Tachometer and reversible counters tachometer (96 x 48 x 147.5mm) RS232
RS485
 yes
 4  AC/DC
A6000 DC and AC Voltage /Current (96 x 48 x 97.5) RS232
RS485
YES
4 AC/DC
A7000 DC/AC Voltage/Current (72 x 36 x 118mm) RS232
RS485/BCD
YES
4 AC/DC
Strain Gauge Meter Back to top
A5000 Strain gage with output options from A5000 modular series (96 x 48 x 147.5mm) RS232
RS485
 yes
 4
 AC/DC
A6000 Strain gage with output options from A6000 modular series (96 x 48 x 97.5) RS232
RS485
YES
4
AC/DC
A7000 Strain gage with output options from A7000 modular series (72 x 36 x 118mm) RS232
RS485/BCD
YES
4
AC/DC
ASG-151 Analog peak hold, HI LO set points, excitation supply.      4  90 -132VAC
180 -264VAC
ASG-156A Built in micro computer, Direct connect strain gauge meter.  yes  yes  4  90 -132VAC
180 -264VAC
ASG-251 Hi and Lo set points  yes    4 19 - 29VDC
ASG-157 Built in micro computer, Direct connect strain gauge meter. memory 4 pattern set points  yes  yes  4  90 -132VAC
180 -264VAC

Remote Monitor (BCD Input)

Back to menu
        Digits Power 
AI-304 Parallel (BCD) input Remote Indicator with leading zero suppression      4 DC24 V +/- 20%
AI-105A  Remote Monitor with parallel (BCD) input, Polarity display, and leading zero suppression      5 5V/12V DC +/- 10%
AI-204 Miniature Remote Monitor with Parallel (BCD) input and leading zero suppression      4 5V/12V DC +/- 10%
AI-404 Parallel (BCD) input Remote Monitor with leading zero suppression      4 5V DC +/- 5%
AI-406 Remote Monitor with latch, leading zero suppression, and Parallel BCD input.      6 5V/12V DC +/- 10%
AI-416 Remote Monitor with latch and 24V DC input, leading zero suppression, and Parallel BCD input.      6 24V DC DC +/- 10%
AI-901 Large display Remote Monitor with BCD signal input      6 90 to 126V AC 180 to 253V AC
AI-902 Large display Remote Monitor with BCD signal input      6 90 to 264V AC
 

Topac Inc. 231 CJC Highway, Suite 103 Cohasset MA 02025 USA
Tel: 781 740 8778 Fax: 781 740 8779
e-mail: sales@topac.com

| Home | E-mail | Online store | Inquiry form |

This is a world wide web document page design layout and HTML code copyright ©1999 -2004 by Topac Inc. - ALL RIGHTS RESERVED