Motorized Vertical Test Stands
  • MX-110, MX-275, MX-500 and MX-1100

 

MX-110 Motorized Vertical Test Stand
Features of the MX-110
  • One stand for both compression (push) and tension (pull) tests
  • Maximum clearance 9" (with extender 14")
  • Maximum load 110 lbf
  • Jog, Single Cycle, Continuous Cycle (72 hour max.), Force Control
  • Combination of screw drive system and high performance brushless motor provides extremely smooth and powerful operation over the entire speed range.
  • Wide speed range: 0.4 – 11.5 in/min (optional speed ranges available)
  • Force Controlled operation with Imada Z Series force gauges
  • Optional timer and digital distance meter available
  • Conditional Overload Prevention
Specifications
Standard Speed
 0.4~11.5"/min
Optional High Speed
 0.8~23.6"/min
Optional Low Speed
0.15~4.7"/min
MX Series Vertical test stands offer consistent testing and force control capability. The combination of screw drive system and state-of-the-art brushless motor provides extremely smooth and powerful operation over the entire speed range. Connect an MX series test stand with an Imada Z Series force gauge to enable force controlled testing and Conditional Overload Prevention.

High/Low Set Point Force Control
Force control is activated when the applied force is at or between the high and low set point(s) of the Z Series force gauge and is deactivated by the digital timer. Initial carriage speed is controlled by the variable or fixed speed settings.

One Way Force Control
Initial carriage speed is controlled by the variable or fixed speed settings. When the applied force reaches the low set point of the Z Series force gauge, the test stand’s carriage speed is adjusted to 20% of maximum and decreases to zero as the applied force reaches the high set point. Ideal for non-destructive testing. Speed control, quick return and emergency stop are standard features. The MX series accepts any of the standard range Imada force gauges. Optional timer and digital distance meter available.


 

MX-275 Motorized Vertical Test Stand
Features of the MX-275
  • Maximum load 275 lbf
  • One stand for both compression (push) and tension (pull) tests
  • Combination of screw drive system and high performance brushless motor provides extremely smooth and powerful operation over the entire speed range.
  • Jog, Single Cycle, Continuous Cycle (72 hour max.), Force Control
  • Force Controlled operation with Imada Z Series force gauges
  • Wide speed range: 0.4 – 9.4 in/min (optional speed ranges available)
  • Clearance 16"
  • Optional timer and digital distance meter
  • Conditional Overload Prevention
Specifications
Standard Speed

0.4~9.4"/min

Optional High Speed

 0.7~23"/min

Optional Low Speed

0.15~4.2"/min



MX-500 Motorized Vertical Test Stand
Features of the MX-500
  • One stand for both compression (push) and tension (pull) tests
  • Stroke: 13"
  • Maximum load 500 lbf
  • Jog, Single Cycle, Continuous Cycle (72 hour max.), Force Control
  • Combination of ball screw drive system and high performance brushless motor provides extremely smooth and powerful operation over the entire speed range.
  • Wide speed range: 0.2 – 7 in/min (optional speed ranges available)
  • Force Controlled operation with Imada Z Series force gauges
  • Optional timer and digital distance meter
  • Conditional Overload Prevention

 
 

MX-1100 Motorized Vertical Test Stand
Features of the MX-1100
  • One stand for both compression (push) and tension (pull) tests
  • Stroke: 13"
  • Maximum load 1100 lbf
  • Jog, Single Cycle, Continuous Cycle (72 hour max.), Force Control
  • Combination of ball screw drive system and high performance brushless motor provides extremely smooth and powerful operation over the entire speed range.
  • Wide speed range: 0.4 –11.8 in/min (optional speed ranges available)
  • Force Controlled operation with Imada Z Series force gauges
  • Optional timer and digital distance meter
  • Conditional Overload Prevention
 
   
Ordering Information
MX-110
motorized vertical test stand
$2950.00
MX-110S
w/ distance meter
$3550.00
MX-110-TM
w/ timer
$3900.00
MX-275
Motorized vertical test stand
$3750.00
MX-275S
w/distance meter
$4350.00
MX-275-TM
w/ timer
$4700.00
MX-500 Motorized vertical test stand $4250.00
MX-500 -TM w/ timer $5200.00
MX-1100 Motorized vertical test stand $8950.00
MX-1100-TM w/ timer $9900.00
LP99 Optional Lexan Safety Shield $295.00
 

| Home | E-mail | Inquiry form | Manual Force Gage| Torque gage | Related |

Topac Inc 231 CJC Highway, Cohasset MA 02025 USA
Tel: 781 740 8778 Fax: 781 740 8779 e-mail: sales@topac.com

HTML source and page design Copyright ©2000 - 2001 by Topac Inc. - ALL RIGHTS RESERVED

This product offered in collaboration with Micro Photonics Inc.