Vertical Gel Electrophoresis
10 & 20 cm systems
 
The CSL omniPAGE range of Vertical Gel Units combines ease of use with high resolution separations. Two sizes, Mini 10 x 10cm and Maxi 20 x 20cm, share a host of common features including a guaranteed leak proof seal required for trouble free, rapid and uncomplicated gel casting. Utilising a built in gel running module eliminates time consuming transfer of glass plates during casting, a process which can cause gel damage and
misalignment within the glass plates. Glass plates with permanently bonded spacers guarantee perfect spacer alignment. The glass plate sandwich is simply inserted between pressure bars and a minimum of screws tightened – only one screw per side for omniPAGE Mini. This guarantees fast set up times while even pressure bars and ultra soft seals
guarantee leak proof casting. Once the gel has polymerized, the gel running module is simply inserted into the gel tank for electrophoresis.
Vertical Gel Electrophoresis - Features
  • Ideal for high resolution separations
  • Optional low or high buffer volumes
  • Run up to 4 gels simultaneously
  • Cooling prevents distortion and smiling gels
  • User friendly plate clamping system
  • Fully shrouded connectors on safety lid
  • Gold plated terminals resist corrosion
  • Leak free buffer seals
  • Integrated gel casting system with casting base
  • Float glass plates ensure uniform gel thickness and straight sample migration
  • Combs color coded according to thickness - 1mm white, 1.5 mm red, 2.0 mm blue
  • All combs are height adjustable
  • Colored stripes enhance visibility of samples
 
Compact, Dual plate, mini and maxi format
Vertical Electrophoresis units.

10 x 10 Mini
The preferred unit for routine mini protein electrophoresis, the omniPAGE mini is constructed using the latest injection moulding manufacturing techniques. This gives a high quality, low cost product with unsurpassed finish, durability and strength.
The unit incorporates a sealing system which is compatible with all major types of 8 x 10cm and 10 x 10cm precast gel.
Gel casting and running utilise the same insert, no transfer of glass plates during gel casting is necessary. The insert contains just one screw per clamping bar side allowing very rapid set up of both hand cast and precast gels. Ultra soft silicone seals and pressure bars which surround the glass plates guarantee leak proof gel casting. 2mm thick glass plates prevent breakage and have bonded spacers for convenience. Accessory electroblotting and tube gel modules are available which use the same outer tank and lid.
20 x 20 cm Maxi new Wave single clamp system
The new VS20 WAVE Maxi System is the latest product innovation for large format vertical gel electrophoresis. Designed to perform a variety of separations, including first and second-dimension SDS-PAGE, native, preparative, gradient and high-resolution nucleic acid electrophoresis, plus capillary tube gel IEF and electroblotting, the VS20 WAVE is one of the most versatile maxi vertical systems available.

By introducing innovative, new vertical screw-clamp technology within the PAGE insert only four screws are now necessary to secure as many 20x20cm gels. This gives the VS20 WAVE Maxi the selective advantage of a much faster set up speed compared to competitor products whose traditional clamping configurations require as many as 24 screws to secure just two glass plates. In addition, the WAVEs vertical screw-clamp configuration distributes pressure evenly along the height of the gel rather than in the centre to eliminate plate bowing and gel compression, but still maintains a leak-proof seal during casting; while the ergonomic wave-like design of the PAGE insert aids both handling and set up.

Whatever your requirements are the WAVE can be made to meet them. Regardless of whether it is running 2 or 4 gels, electroblotting, and IEF using capillary tube gels or IPG strips, all of these techniques may be performed using the same omni-purpose unit while retaining the benefits of large format electrophoresis, such as extended separation distances, greater sample throughput and superior resolution.

Gel Dimensions
CVS10D - 8.0 x 8.5 cm
VS20WAVED - 18.8 x 17.5 cm
Unit Dimension
CVS10D - 19 x 13 x 15 cm
VSWAVE20D - 30 x 18 x 27 cm
Max Sample Capacity
CVS10D 80 samples 20/gel
VS20WAVED 192 samples 48/gel
Buffer Volume
CVS10
Inner max 250 ml ,Outer max 1200 ml
VSWAVE20D 
Inner max 1200 ml ,Outer max 5300 ml
Part No CVS10DSYS 
Includes:
2 x 2 mm notched glass plates 
2 x 2 mm and plain plates,
1 dummy plate
Bonded 1 mm spacers
2 12 sample 1 mm combs
Casting base
Part No VS20WAVESYS
Includes:
2 x 4 mm notched glass plates 
2 x 4 mm and plain plates,
1 dummy plate
Bonded 1 mm spacers
2 24 sample 1 mm combs
Casting Base
Mini CVS10DSYS
Maxi model VS20WAVED with casting base
 
Ordering Information
CVS10D Mini 10 x 10 Kit with plates spacers combs (no casting base) $600.00
CVS10DSYS Mini 10 x 10 Kit with plates spacers combs and Casting Base $699.00
CVS10PRE Mini 10 x10 no accessories $535.00
VS10WSYS Wide 10 x 20 Wide kit with plates combs and casting base $925.00
VS20WAVED Maxi 20 x20 Kit with plates spacers combs (no casting base) $1150.00
VS20WAVESYS Maxi 20 x20 Kit with plates spacers combs and casting base $1255.00
VS10CBS
(mini 10 cm)

Complete system for vertical electrophoresis including mini vertical unit (CVS10DSYS above)
Plus Electroblotting module with 4 compression cassettes for gel sizes up to 10 x 10 cm and 6 fiber pads

$925.00  

CVS10CES
(mini 10 cm)

Complete system for vertical electrophoresis including mini vertical unit (VS10DSYS above)
Plus Capillary module with tubes, blanking plugs, 2D combs and spacers.
Plus Electroblotting module with 3 compression cassettes for gel sizes up to 10 x 10 cm and 6 fiber pads

$1285.00  
VS20WAVECES
(maxi 20cm)
Complete system for vertical electrophoresis including Maxii vertical unit (VS20WAVESYS above)
Plus Capillary module with tubes, blanking plugs, 2D combs and spacers.
Plus Electroblotting module with 4 compression cassettes for gel sizes up to 20 x 20 cm and 6 fiber pads
$2200.00  
Combs Click for VS combs    



| Home | E-mail | Inquiry form | | Related |
| Power Supplies| Horizontal Gel | DNA | Blotting |

 Topac Inc. 231 CJC Highway, Cohasset MA 02025 USA
Tel: 781 740 8778 Fax: 781 740 8779 e-mail: sales@topac.com

HTML source and page design Copyright ©22014 by Topac Inc. - ALL RIGHTS RESERVED