DTX2 Cap Torque Tester


You can purchase online where you see the check mark		Click on the assistant to view the contents of your shopping cart

Cap Torque Tester
Series DTX2

Programmable high/low setpoints with color-coded LED indicators and output signal for quick go/no go testing
1,000 Data memory for computer download
lbf-in, kgf-cm, and N-cm units are selectable
RS-232C, Digimatic and Analog outputs
Runs on internal Ni-MH batteries or AC adapter
Both clockwise and counterclockwise operation
Overload capacity 200% of F.S.
Real time and peak mode (selectable)
Overload indicator and output signal
Low battery indicator
Clamps containers from 1/2"~ 7" in diameter

Imada’s cap torque tester offers programmable high/low setpoints for go/no-go testing. ORANGE lights up for measurements less than Low setpoint, GREEN for between High and Low setpoint, and RED for over High setpoint.

Store up to 1,000 values in memory, which can be transmitted using the serial output. Use the real time mode to display torque transients, or the peak mode to capture the peak torque achieved during a test. Selectable measuring units of lbf-in, kgf-cm, or N-cm.

DTX2 cap torque testers include AC adapter/charger and built-in Ni-MH rechargeable batteries, 1" high standard pegs (optional long pegs and calibration kit available).

DTX2 Ranges (resolution)Accuracy: ±0.5% F.S. ±1 LSD
Model	Capacity (Resolution)
	lbf-in	kgf-cm	N-cm
DTX2-15	15.00 (0.01 lbf-in)	20.00 (0.01 kgf-cm)	200.0 (0.1 gf)	$1635.00
DTX2-40	40.00 (0.01 lbf-in)	50.00 (0.01 kgf-cm)	500.0 (0.1 gf)
DTX2-85	85.0 (0.1 lbf-in)	100.0 (0.1 kgf-cm)	1000 (1 N-cm)

This product offered in collaboration with Micro Photonics Inc.