Topac Inc. The Instrumentation Compamy
You can purchase online 
where you see the check mark
 Click on the assistant to view the contents  of your shopping cart view shopping cart
 
Model 6310 Kinetics, Scanning and Quantitation Spectrophotometer

The 6310 Is an advanced measuring system with modes for photometrics, concentration, quantitation, kinetics and scanning. The 6310 will meet the demands of a wide range of applications especially those in the clinical, veterinary, environmental, general QC and performance testing areas. With a memory capacity of 50 methods for each mode, the full open operating system ensures compatibility with reagent kits from most manufacturers, as well as enabling full customization to the operator's choice of chemistries and operating procedures.

The 6310 features customizable menus to adapt to your requirements. Activating the Supervisor Security functions enables all the set-up options to be locked and accessed with a security code number.

In the photometrics mode, absorbance, transmission and wavelength are displayed simultaneously on the readout so no range changing is required. Simple concentration measurements using a single standard or factor can be made in the concentration mode. The quantitations mode allows more complex concentration methods to be programmed, using up to six standards to create a calibration curve. For each curve fit option , a linearity correlation co-efficient is calculated. A real time graphical display of kinetic measurements is shown along the calculated concetration value and other relevant data. The spectrum scanning mode allows scans to be made across any selected portion of the 320 to 1000nm range. The auto-ranging absorbance axis allows scans to be commenced with no prior knowledge of the peak absorbance level expected.

The 6310 has an analogue output that can be used to drive chart recorders and other analogue recording or conversion devices, as well as a bi-directional RS232 serial port for connection to serial printers and computers.

The 63-Ten software allows full emulation of the instrument functions on a PC including the import of results and download of methods. An electrically heated cuvette holder and control unit is available as well as a water heated cuvette holder and a thermostatically controlled water circulator. The external, programmable sipper pump ensures faster and safer sample handling. The large sample compartment can accomodate a wide range of sampling devices including cuvette holders from 10mm to 100mm in path length, a four-position rotary cuvette holder, and test tubes from 12.5 to 25mm.

  • Supplied with a pack of 100 10x10 plastic cuvettes
  • Mains lead and 10x10mm cuvette holder included
  • Comes with interface cable and instruction manual

Specifications
Wavelength Range 320-1000nm
Resolution (accuracy) 1nm (2nm)
Spectral Bandwidth 8nm
Absorbance -0.300 to 1.999A
Transmittance 0 ro 199.9%T
Concentration -300 to 1999 Conc
Selectable Resolution 1, 0.1, 0.01 or 0.001
Calibration blank with a single standard or factor
Memory 50 methods
Quantitation -300 to 1999 Conc
Selectable Resolution 1, 0.1, 0.01 or 0.001
Calibration blank with up to 6 standards
Curve Correction Linear regression, interpolation or linear regression through zero
Memory 50 methods including calibration curve
Kinetics Display Graphical and calculated concentration value
Calibration Against standard and factor
Correlation factor R2 value displayed with results
Memory 50 methods and 5 graphed results
Spectrum Any range between 320 and 1000nm
Scan Data Interval 1, 2 or 5nm selectable
Analysis Absorbance and wavelenth of peaks and valleys
Memory 50 methods and 5 scans
GLP Operator ID, Supervisor Security, Real time clock and calendar, method display lock
Outputs , Analogue and RS232 115/230V a.c -20% +10% 50/60Hz
Input Power <50W
Dimensions (mm) 365 x 272 x 160
Weight 6kg
Ordering Information
631 001 Model 6310 is supplied with a pack of 100 10x10 plastic cuvettes, mains lead, 10x10mm cuvetted holder, interface cable and instruction manual. (230V/50Hz) $3680.00
632 531 Model 6310 is supplied with a pack of 100 10x10 plastic cuvettes, mains lead, 10x10mm cuvetted holder, interface cable and instruction manual. (110V/60Hz) $3680.00
630 204 10mm cuvette holder $150.00
630 005 Adjustable path length cuvette holder to 10 to 100mm tubes $200.00
634 001 Rotary cuvette holder for up to four 10mm cuvettes $730.00
648 001 Water heated cuvette holder compatible with a thermostatically controlled water circulator $470.00
632 001 Sipper pump supplied with inlet and outlet tubing, mains cable and instruction manual (230V/50Hz) $1380.00
632 031 Sipper pump supplied with inlet and outlet tubing, mains cable and instruction manual (110V/60Hz) $1380.00
633 001 Heated cuvette system $1200.00

 

   

Topac Inc 231 CJC Highway, Cohasset MA 02025 USA
Tel: 781 740 8778 Fax: 781 740 8779 e-mail: sales@topac.com


| Home | E-mail | Inquiry form | Related products|

HTML source and page design Copyright ©2011 by Topac Inc. - ALL RIGHTS RESERVED