where you see the check mark
|
|||
| You
can purchase online where you see the check mark |
|
Click on the assistant to view the contents of your shopping cart | |
|
|
| The Oxyweld is a battery operated oxygen indicator for measuring the oxygen in purge gases and similar applications |
|
 |
Features of the oxyweld
High accuracy O2 analyzer for welding Modified atmosphere packaging version of this product |
| O2 oxygen
monitor Portable and battery operated the Oxyweld is convenient instrument for checking oxygen concentrations in purge gases. The instrument samples the oxygen, with the built in pump, when the sample button is pressed. The instrument is factory calibrated with certified gases and can be re-calibrated from atmospheric oxygen by the user. Periodic calibration with a zero and span gas of oxygen concentrations is recommended. ( This service is available from Topac ). Many high specification welding applications require monitoring a residual oxygen level measured in the ppm oxygen range - typically between 20 and 200 ppm. Hand held oxygen analyzers like the Oxyweld are not accurate enough for such applications. Click here for higher accuracy oxygen monitors for welding. Specification of O2 Oxyweld |
|
| Range | 0 - 100% Oxygen |
| Resolution / Accuracy | 0.1% +/- 0.1% |
| Sensor | electrochemical type |
| Sampling | PTFE tubing with hypodermic needle |
| Batteries | 4 x AA |
| Power saver | Auto off after 10 minutes idle time |
| Weight | 400 gms |
| Calibration | Calibration from atmospheric oxygen (20.9%) |
| Dimensions | 200 x 100 x 40 mm |
| Ordering Information | ||
| Model Number | Price | |
| O2WELD Handheld unit with steel sample tube for welding | $1750.00 | |
Topac Inc. 99 Derby Street, Suite 303 Cohasset MA 02025 USA
Tel:
781 740 8778 Fax: 781 740 8779
| Email |
Home|
This
is a world wide web document copyright ©1998, 1999 by Topac Inc. - ALL
RIGHTS RESERVED