The
tough and compact GasAlert, available with an internal vibrator alarm,
provides unequalled single-gas protection. Automated calibration and
3-year lithium battery mean extraordinary cost of ownership advantages.
Weighing just 2.9 oz. (83 g), GasAlert continuously monitors
the ambient air for H2S, CO, SO2, Cl2, HCN, NO2, NH3, PH3 or O2.
The
optional Sampler pack includes a rugged pump with self-regulating
motor speed to provide consistent airflow in ever-changing
environmental conditions. The sampler is connected by hose
to a gasalert monitor and the fixed tube inserted
in the area to be tested. Runs 30-hours on 2 AA alkaline
or NiMH rechargeable batteries.
Pump
constantly monitors itself for proper performance.
Low flow alarm, battery alarm and system fault alarm with
audible/visual warnings
Unique, manual flow-block test verifies proper performance
Built-in water trap and particulate filters.
Optional extra-long probes and sampling hoses available. Flow
rate 300ml/min sampling distance up to 50ft.
| Gas |
TWA
Alarm |
STEL
Alarm |
Default
Low Level
Alarm |
Default
High Level
Alarm |
Detection
Range |
Operating
Temperature |
| Hydrogen
Sulfide H2S |
10 ppm |
15 ppm |
10ppm |
15ppm |
0-100ppm |
-40 to +50 °C
-40 to +122 °F |
| Sulfur
Dioxide SO2 |
2 ppm |
5 ppm |
2ppm |
5ppm |
0-100ppm |
| Hydrogen
Cyanide HCN |
4.7 ppm |
10.0
ppm |
4.7ppm |
10ppm |
0-30
ppm |
| Carbon Monoxide
CO |
35 ppm |
200 ppm |
35ppm |
200ppm |
0-999ppm |
-30 to +50 °C
-22 to +122 °F |
| Chlorine
CL2 |
0.5 ppm |
1.0 ppm |
0.5ppm |
1
ppm |
0-50 ppm |
-20 to +50 °C
-4 to +122 °F |
| Nitrogen Dioxide
NO2 |
2.0 ppm |
5.0 ppm |
2 ppm |
5
ppm |
0-99 ppm |
| Ammonia
NH3 |
25 ppm |
35 ppm |
25ppm |
50
ppm |
0-100ppm |
| Phosphine
PH3 |
0.3 ppm |
1.0 ppm |
1 ppm |
2 ppm |
TBA |
| Oxygen
(vol%)O2 |
NA |
NA |
19.5% |
23.5% |
0-30% |
|
| Calibration: |
Automatic |
| Backlight: |
Low light
(auto) |
| alarm condition (auto); |
on demand |
| Full function self-test: |
Veri. es integrity of sensor, circuitry and battery; audible/visual alarms |
| Sensor: |
Plug-in, electrochemical cell (temperature compensated) |
| INDICATORS AND ALARMS: |
Clearly advises alarm levels both visually and audibly |
| Visual alarm: |
Flashing, wide-angled alarm lens with dual red
LEDs, plus alarm LCD readout |
| Audible
alarm |
High-output, pulsing 85 dB at 1 ft. / 0.3 m (typical) |
| |
Con. dence beep: Every 5 seconds (.
eld-selectable) |
| Other: |
Low battery; off warning; sensor fail |
| Optional internal vibrator: |
Vibrates in sync with audible and visual alarms |
| CONTINUOUS LCD DISPLAY: |
Alphanumeric gas readout and status display advises:
Gas ppm or %: Continuously displays gas concentration present |
| TWA and STEL ppm or
% |
Records and displays on demand |
| Peak ppm or %: |
Records and displays peak (maximum) exposure to gas on demand |
| Setpoints: |
Displayed on activation (auto) and on demand in ppm or % |
| TESTS: |
Full function self-test on activation (auto)
Battery- Continuous (auto)
|
| GENERAL SPECIFICATIONS: |
|
| Case |
Impact-resistant ABS enclosure |
| Humidity: |
5% to 95% RH (non-condensing) (15% to 90% non-condensing for PH3 and NH3) |
| EMI/RFI: |
Complies with EMC Directive 89/336/EEC |
| Battery type: |
3-volt lithium (camera battery available locally) |
| Battery life: |
3 years (9,000 hours) |
| Size: |
1.1 x 2.0 x 3.75 inches / 28 x 50 x 95 mm |
| Weight: |
2.9 oz. / 83 g |
|