Controller temperature conductivity resistivity salinity meter with RS232 and graphing display.


You can purchase online where you see the check mark		Click on the assistant to view the contents of your shopping cart


Conductivity / Resisitivity / Salinity / Temperature Controller


Features of the Consort R315 Conductivity Controller 2 conductivity and 2 temperature channels on/off or proportional control functions 6 conductivity, 6 resistivity and 5 salinity ranges Displays cell constant In line calibration without removing electrodes Built in clock displays time and date Built in help keys guide you through operation *Stores up to 1200 values and time and date at programmable interval* Stores maximum and minimum readings Graphic and digital displays plot results on screen Analogue recorder plots graph on LCD screen Automatic Pt1000, Pt100 selection *Password protection* Robust splash proof cabinet for wall mounting. Free software


Introduction Consort R315 Conductivity Resistivity Salinity controller
This is a feature packed controller for conductivity / resistivity / salinity / dissolved solids meter with powerful set up options, graphic display and a host of other features which make it easy to use for almost any application requiring a control signal based on these parameters The R315 controller uses 2 electrode industrial conductivity cells to provide wide range and high accuracy measurements of conductivity, resistivity and salinity. Automatic temperature compensation is included for NaCl . The meters also have a sophisticated user interface with a graphical back-lit LCD display. The display can plot data from memory directly on to the screen as well providing tabulated data, current measurement information, help to the user, and GLP calibration reports. Calibration is automatic with any of 3 pre-programmed standards or your own standards.


Probe set up on screen	Plotting data on screen

Specification of R315 Series Conductivity / Resistivity / Salinity Controller

Interface
RS232	Bi directional
Relays	3 solid state relays programmable for high/low alarms
Analogue	two 4 - 20 mA outputs for recorder or proportional control
Network	4 wire networking with other 300 series controllers

Ordering Information

Model R315 Conductivity Controller Only		$1100.00
Use a cell constant 1 cell to control from 0.1 uS/cm to 200mS/cm OR Use a cell constant 0.1 to control down to 0.01 uS/cm or use a cell constant 10 cell to control up to 2000 mS/cm
Industrial Conductivity Cells
Model S311Y 120 x 12 mm Cell Constant 1, 0 - 20 mS/cm, 0 .. 80C	2 electrode cell epoxy with graphite electrodes	$146.00

Model S313Y 120 x 12 mm Cell Constant 1, 0 - 200 mS/cm, 0 .. 100C	2 electrode cell glass with platinum electrodes for highest linearity	$146.00

Model S317Y 120 x 12 mm Cell Constant 0.1, 0 - 20 mS/cm, 0 .. 100C	2 electrode cell glass with platinum electrodes measure down to 0.1 uS/cm - for low ionic solutions or free chlorine control	$156.00

Model S318Y s 120 x 12 mm Cell Constant 10, 0 - 2000 mS/cm, 0 .. 100C	2 electrode cell glass with platinum electrode measure up to 2000 mS/cm - for very high ionic solutions	$156.00

Temperature probe
Model S353Y temperature probe Pt1000		$142.00
Cables
Model S701B 1 M cable with BNC plug		$54.00
Model S702B 2 M cable with BNC plug		$56.00
Model S705B 5 M cable with BNC plug		$65.00
Model S710B 10 M cable with BNC plug		$100.00
Model S720B 20 M cable with BNC plug		$128.00
Model S730B 30 M cable with BNC plug		$154.00
Other Lab conductivity cells here

Topac Inc. 231 CJC Highway, Suite 103 Cohasset MA 02025 USA
Tel: 781 740 8778 Fax: 781 740 8779