![]() |
||||
| You can purchase online where you see the check mark |
Click on the assistant to view the contents of your shopping cart | Contact | ||
| Home | ||||
| Related | ||||
|
|
|
FORCE Sensor - compression & tension |
|
![]() |
Features Lorenz K12 force sensor for tension and compression
|
| Specifications compression force transducer |
| K12 compressive and tensile force transducer Specifications | ||
| nominal load kN | 0.5/1/2/5/10 | 20/50/100/200/ 500/1000 |
| Sensistivity | 2 mV/V | 1 mV/V |
| Accuracy for tension (3 options ) Accuracy for tension and compression |
0.1
% 0.25% |
|
| Service load ( operates within specifications ) |
130% | |
| limit load (over load range but with degraded specifications ) |
150% | |
| Ultimate load (load beyond which damage may occur) |
>300% | |
| Max dynamic load (sinusoid ) | 70% | |
| Position feedback | < 0.3 mm | |
| Bridge resistance | 350 ohms | |
| Insulation resistance | > 2 x 10e9 ohms | |
| Supply voltage | 2V..12V | |
| max supply voltage | 15V | |
| Sensitivity tolerance | +/- 0.1% | |
| Temp coefficient of sensitivity | 0.07%/10K | |
| Temp coefficient of zero | 0.25%/10K | |
| Reference temperature | 23 °C | |
| Nominal temperature | -10 °C to +70 °C | |
| Service temperature | -30°C to +85 °C | |
| Storage temperature | -50°C to +90°C | |
| Combined error linearity
& hysteresis Creep error %/30 min Lateral force resistance |
0.1% 0.07% 70% |
|
| Connector | 6 pin DIN | |
| Interface | 0 - 10 Volts
DC or 0 (4)mA to 20 mA |
|
![]() |
| Ordering information force transducers for compression & tension |
Topac Inc. 231 CJC Highway,
Suite 103 Cohasset MA 02025 USA
Tel: 781 740 8778 Fax: 781 740 8779
This is a world wide web document copyright
© 2001 by Topac Inc. - ALL RIGHTS RESERVED