Topac Inc. The Instrumentation Compamy
You can purchase online 
where you see the check mark		  Click on the assistant to view the contents  of your shopping cart view shopping cart Contact
Home
Related

FORCE Sensor - compression & tension

Features Lorenz K11  force sensor for tension and compression

  • Ranges 0.5 - 5000 kN
  • High accuracy
  • tension and compression
  • For materials testing systems
  • Stainless steel
  • IP 67
Low profile pancake design for tension or compression
 
Nominal Load
kN		 ØA
mm		 B
mm		 ØC
mm		 ØD
mm		 ØE
mm		 ØF
mm		 K
mm		 ØTK
mm		 P
mm		 S
for		 Z Fig tighten
torque Nm 
0.5/1/2/5/10 90 2 60 6.6 25 M12 32 75 4 x 90° M6 2 1 0.8
20/50 150 2 105 11 55 M24 x 2 38 130 8 x 45° M10 2 1 40
`00/200 185 2 135 13 70 M36 x 3 42 160 8 x 45° M12 3 1 70
500 240 2 160 17 90 M45 x 3 60 200 12 x 30° M16 3 1 160
1000 295 5 200 21 130 M80 x 4 95 250 12 x 30° M20 4 2 610
2000 390 3 270 26 190 M120 x 4 117 330 24 x 15° M24 4 2 1050
5000 447 3 330 32 250 M180 x 6 157 390 24 x 15° M30 4 2 1250


Specifications compression/tension force transducer
K11  compressive and tensile force transducer  Specifications
nominal load  0.5/1/2/5/10/20/50/100/200/
500/1000/2000/5000
Accuracy for compression (3 options )
Accuracy for tension and compression		 0.05
0.1		 0.2
0.4		 0.5
1.0
Service load 
( operates within specifications ) 		 130%
limit load 
(over load range but with degraded specifications ) 		150%
Ultimate load
(load beyond which damage may occur)		 >300%
Max dynamic load (sinusoid )  80%
Position feedback  < 0.12 mm
Bridge resistance 350 ohms
Insulation resistance > 2 x 10e9 ohms
Supply voltage 2V..12V
max supply voltage 15V
Sensitivity 2.00 mV/V +/- 0.1%
Temp coefficient of sensitivity 0.05%/10K 0.07%/10K 0.12%/10K
Temp coefficient of zero 0.03%/10K 0.05%/10K 0.01%/10K
Reference temperature 23 °C
Nominal temperature -10 °C to +55 °C
Service temperature -30°C to +65 °C
Storage temperature -50°C to +95°C
Combined error linearity & hysteresis
non repeatability
Creep error %/30 min		 0.05%
0.03%
0.03%		 0.15%
0.08%
0.08%		 0.35%
0.15%
0.15%
Connector 6 pin DIN 
Interface 0 - 10 Volts DC
or 0 (4)mA to 20 mA
 
Ordering information force transducers for compression & tension
Part no Model Accuracy Range Price view shopping cart
LM100086 K-K11/N250-G15 0.05% 500N $1250.00  
LM100087 K-K11/N250-G22 0.2% 500N $815.00  
LM100088 K-K11/N250-G25 0.5% 500N $715.00  
LM100083 K-K11/N310-G15 0.05% 1kN $1250.00  
LM100084 K-K11/N310-G22 0.2% 1kN $815.00  
LM100085 K-K11/N310-G25 0.5% 1kN $715.00  
LM100080 K-K11/N320-G15 0.05% 2kN $1250.00  
LM100081 K-K11/N320-G22 0.2% 2kN $815.00  
LM100082 K-K11/N320-G25 0.5% 2kN $715.00  
LM100077 K-K11/N350-G15 0.05% 5kN $1250.00  
LM100078 K-K11/N350-G22 0.2% 5kN $815.00  
LM100079 K-K11/N350-G25 0.5% 5kN $715.00  
LM100074 K-K11/N410-G15 0.05% 10kN $1250.00  
LM100075 K-K11/N410-G22 0.2% 10kN $815.00  
LM100076 K-K11/N410-G25 0.5% 10kN $715.00  
LM100071 K-K11/N420-G15 0.05% 20kN $1825.00  
LM102391 K-K11/N420-G22 0.2% 20kN $1215.00  
LM100073 K-K11/N420-G25 0.5% 20kN $875.00  
LM100024 K-K11/N450-G15 0.05% 50kN $1825.00  
LM100022 K-K11/N450-G22 0.2% 50kN $1215.00  
LM100023 K-K11/N450-G25 0.5% 50kN $875.00  
LM100026 K-K11/N510-G15 0.05% 100kN $2500.00  
LM100020 K-K11/N510-G22 0.2% 100kN $1735.00  
LM100025 K-K11/N510-G25 0.5% 100kN $1250.00  
LM100028 K-K11/N520-G15 0.05% 200kN $2500.00  
LM100021 K-K11/N520-G22 0.2% 200kN $1735.00  
LM100027 K-K11/N520-G25 0.5% 200kN $1250.00  
LM100062 K-K11/N550-G15 0.05% 500kN $3525.00  
LM100063 K-K11/N550-G22 0.2% 500kN $2455.00  
LM100064 K-K11/N550-G25 0.5% 500kN $2025.00  
LM100065 K-K11/N610-G22 0.05% 1000kN $5645.00  
LM100066 K-K11/N610-G25 0.2% 1000kN $3755.00  
LM100068 K-K11/N620-G22 0.05% 2000kN $8025.00  
LM100069 K-K11/N620-G25 0.2% 2000kN $6425.00  


| E-mail | Home | Related |

Topac Inc. 231 CJC Highway, Suite 103 Cohasset MA 02025 USA
Tel: 781 740 8778 Fax: 781 740 8779


This is a world wide web document copyright © 2001 by Topac Inc. - ALL RIGHTS RESERVED