Non contact variable emissivity infra red thermometers with laser sighting and digital photography


You can purchase online where you see the check mark		Click on the assistant to view the contents of your shopping cart


Non Contact high precision Hand held IR Photographic Thermometers Measure - Photograph - Document date & time
High Performance IR thermometers give instant temperature readings in the range -30 to + 900 degrees C ( 4 models ) -25 to +1600 degs F, with high accuracy laser targeting, graphics display data logging and digital photo reference.
	Features of the MX6 series high precision infra red thermometers with photo reference Make digital reference photographs as you measure temperature Precise temperature measurement with tenth degree display. 0.75% accuracy Precision Laser Sighting with 3 dot true dimension system for target area Adjustable emissivity Emissivity table for 30 common materials Graphing display automatically shows last ten readings Max and Min Temperature Display High Low Audible and Visible alarms Difference and Average Flexible input system for contact measurement with K type surface probe. Backlit graphic LCD display with Bar Graph 100 point data logging Windows data graphing software
True Dimension is a coaxial three-dot laser sighting system indicating the true diameter of a measurement spot (90% energy). The target is highlighted at all distances with a center measurement dot and two accompanying diameter markers. At the focal point, where the measurement spot size is the smallest, the dots line up vertically, rotating as the unit is moved closer to or further from the target. This advanced coaxial system uses an extra bright 635nm laser (tested to the same safety and power standards as less bright laser sights) to clearly highlight the targeted area.
Windows Software With the MX6 data management software you can organize display and print temperature and time data. You can present data from both contact and non contact probes. The software also includes the ability to store data points from single measurements or over programmed time intervals. Create customized company reports with PhotoTemp MX6 thermometer data and photos. Automatically download and insert information from PhotoTemp MX6 data files into reports for fast, professional results.	Related products ST60XB/ST80XB mid range IR thermometer ST20XB short range Digital contact thermometers Every infrared thermometer can measure temperature, but only the PhotoTemp MX6 thermometer measures temperature while simultaneously digitally photographing the measured area and its surroundings. The proof is in the picture! Temperature measurement locations are instantly captured in a digital photo with a time and date stamp in the image. The photo shows the precision True Dimension™ laser sighting with a circle of double bright laser dots, pinpointing the exact measurement location, without the need for a view finder. Make sure the inspection was done properly. Use the DataTemp® MX software to upload the temperature measurements and photos to double-check all work. Ensure consistency by using prior photos as a reference and the True Dimension laser as a guide to guarantee the next measurement is of the same area.
Close Focus Option Measure temperature of objects as small as 6mm (0.24") at 300 mm (11.4) distance Sub Zero Option Measures temperatures as low as -50°C (-58°F)



Applications
Electrical Industrial Check for hot spots in electrical panels, circuit breakers, generators and gearboxes HVAC/R Check and monitor supply and return registers, air stratification and duct leakage. Transportation Monitor temperatures of gasoline and diesel engine cylinders and railroad axles and bearings. Other applications Measure temperature quickly in hard to reach locations, check food, fire safety, asphalt

Specification of MX6 series IR thermometers with photo reference

Model	Temperature Range
PhototempMX6	-30 - + 900 degs C (-25 to +1600 F )
MXSZ (sub zero option)	-50 - + 500 degs C (-58 to +932 F)
Distance to Spot Ratio	MX6 60:1, MXCF 50:1 (close focus option)
Smallest measurement diameter	19mm( 0.76") standard, 6mm (0.24") close focus option
Emissivity	Variable
Response time to 95% reading	250 mS
Accuracy	+/ 0.75% of reading or +/- 1 deg C whichever is greater above 23 deg C
Repeatability	better than +/- 0.5 % or +/- 0.1 deg C whichever is greater
Response time	250 ms (95% of reading)
Spectral Response	8 - 14 microns thermopile detector
Display resolution	0.1 degs C up to 900 C ( 0.5 degs F )
Ambient operating conditions	0 - 50 C 10 - 95% RH non condensing
Power	2 AA batteries
Battery life	8 hrs (13 hrs with photographic mode off) 50 photos with flash (200 without flash)
Tripod Mount	1/4" - 20UNC
Dimensions	200 x 170 x 50 mm
Weight	480 g (1lb 6 ozs )

Laser	IEC Class 2, FDA Class ll
Software	Windows 98, 2000 XP compatible
Data Logging	100 points

Camera
Number of images	26 images 640x480 pixels (VGA) 100 images 320 x 240 pixels
Camera Lens	6mm - roughly equivalent to a 43 mm lens on a 35mm camera
Focusing distance	200mm to infinity
Light sensitivity	6 lux without flash
Shutter speed	< 1/15th second
File format	.jpg
Flash recharge time	5 secs
Data interface	USB 1.1

Ordering information non-contact IR Thermometers with camera

Model	Temperature Range	Features	Price $	Order online
MX6	-30 - + 900 degs C (-25 to +1600 F )	Kit - all features + Windows Data graphing USB cable K Thermocouple, Case	$1495.00
CR		NIST traceable calibration certificate	$100
CF		Close focus option	nc
SZ	-50 - + 500 degs C (-58 to +932 F )	Sub zero range option	nc

Topac Inc. 231 CJC Highway, Suite 103 Cohasset MA 02025 USA
Tel: 781 740 8778 Fax: 781 740 8779

Features of the MX6 series high precision infra red thermometers with photo reference