![]() |
|||
| You can purchase online where you see the check mark |
Click on the assistant to view the contents of your shopping cart | ||
| Digital Panel Meters Standard 4.5 digit DC Voltage |
![]() |
Digital panel meters from Asahi Keiki offer impressive specifications, reliability and low cost for a variety of applications |
| AP-141 | Features
|
![]() |
| Specifications AP141 |
| Input Configuration | Single ended |
| Input Bias Current | 100 pA |
| Conversion Rate | 2.5 /sec |
| Normal mode rejection | More than 50dB (50/60Hz) |
| Zero Stability | Automatic Zero Adjustment |
| Display | LED 14.2 mm 4 1/2 digit |
| Polarity | "-" automatic |
| Decimal point | Set to any position |
| Over-range indication | When input exceeds max "0000" flashes |
| Power Supply | AC 90 - 132V AC 180 - 260V DC 5 Volts +/-5% 150 mA max. DC 24 Volts +/- 20% 35 mA max. |
| Operation temperature | 0~ 50 C, 35 - 85% RH |
| Power Consumption | 2 VA |
| Dimension mm H x W x D | 48 x 96 x 73 mm DIN size |
| Weight | Approx 160 g AC version, 90 g DC version |
| Dielectric Strength | AC type ~
between input (lo)
terminal and ground DC 500 V, between power supply terminal and
input terminal, ground, common and case AC 1500 Volts for 1 min. DC type ~ Between input lo and power supply (0), DC 500 V |
| Insulation Resistance | DC 500V 100 M Ohm at above terminals |
| DC Voltage Measurement |
| Accuracy +/- 0.03% of reading +/- 1 digit (23 C +/-5 C ) |
![]() |
| Click on diagram for a larger image |
| Ordering Information |
Topac Inc. 231 CJC Highway, Suite 103
Cohasset MA 02025 USA
Tel: 781 740 8778 Fax: 781 740 8779
e-mail:
sales@topac.com
| Home | E-mail | Online store | Inquiry form | Related |
This is a world wide web document page design
layout and HTML code copyright ©1999-2002 by Topac Inc. - ALL RIGHTS
RESERVED