Digital Panel Meters
Modular - Voltage/Current/Resistance
Asahi Digital panel meters from Asahi Keiki
offer impressive specifications, reliability
 and low cost for a variety of applications
 
A6000
     Features
  • Modular Panel Meter Systems
  • External Control
  • Choose AC or DC, Voltage or current modules
  • Inputs modules for resistance, RTD, thermocouples, frequency, and strain gages.
  • Output modules -setpoint- analog - RS232 & RS485
  • Universal power supply 90-264VAC or 6-60VDC
  • Dual display option for setpoint
The A6000 is a modular panel meter system with a selection of input and output cards to suit your application. Choose from 18 different input modules for AC, DC, Voltage and current, temperature, frequency, and strain gage inputs. Select from 8 different output options, none, Hi/Lo set point, analog, RS232, RS485, or a combination. (see order details at the bottom of this page)
A6000 Common Specifications
Specifications
Main Display Red LED 20 mm high
Sub Display Green LED 6 mm high
Conversion Rate 1000/sec
Maximum Display 9999
Over-range indication displays "OVER" or "-OVER"
Zero Display Leading "zero" suppression
Decimal point Set to any position
Operating Temperature 0~ 50° C, 35 - 85% RH
Storage Temperature -10 ~+70° C, < 60% RH
Power Supply AC 100 - 240 Volts (AC Main Unit) +/-10%
DC 12 - 48 V ) DC main unit ) +/-10%
Power Consumption ~ 8VA (max load)
Dimensions mm 96 x 48 x 97.5
Weight 450 g
Dielectric strength (AC)Power supply/ input terminal/ output terminal - AC 1500V 1minute
(DC)Input terminal /output terminal - DC 500 V 1 minute
(Common) case/each terminal AC1500 V/min
Insulation resistance DC 500V more than 100 MOhm at above terminals
 
 INPUT MODULES
*Base prices include input module, and single display. These are ready to use meters powered by AC voltage. To add output options or change the power supply, choose from options below or follow the links to the store configurator*
 DC Voltage Measurement
 
Code 01 Range Display
adjustable
Input Protection Accuracy(23ºC ±>5ºC, 35~85% RH)
11 ± 99.99 mV
offset ± 9999
Full scale
0 to ± 9999

±50V ±(0.03% of rdg + 1 digit base price
no output
$319.00
12 ±999.9 mV ±50V ±(0.03% of rdg + 1 digit
13 ±9.999 V ±250V ±(0.03% of rdg + 1 digit
14 ±99.99 V ±250V ±(0.03% of rdg + 1 digit
15 ±700 V ±700V ±(0.1 % of rdg + 2 digit)
 
DC Current Measurement Module
 
Code
02
Range Display
adjustable
Input
Protection
Accuracy
(23ºC ±>5ºC, 35~85% RH)
21 ±99.99 uA offset ± 9999
Full scale
0 to ± 9999
±10mA ±(0.1% of rdg + 2 digit) base price
no output
$313.00
22 ±999.9 uA ±10ma
23 ±9.999 mA ±50mA
24 ±99.99 mA ±500mA
Code 03 ±3 A
25 ±999.9 mA
26 ±2.000 A

Process Control Module
Code
B
Range Display
adjustable
Accuracy
1V 1 - 5V offset ± 9999
Full scale
0 to ± 9999

±(0.03% of rdg + 2digit) base price
no output
$362.00
2V ±5V
2A 4-20 mA ±(0.1% of rdg + 3digit)
3A ±20mA
       
AC Voltage and Current True RMS- Modules
Code
4
Ranges Display
adjustable
Input Protection Accuracy(23ºC ±>5ºC, 35~85% RH)
11 99.99 mV offset ± 9999
Full scale
0 to ± 9999

50V ±(0.2% of rdg +20 digit) base price
no output
$362
12 999.9 mV 50V ±(0.2% of rdg +20 digit)
13 9.999 V 250 V ±(0.2% of rdg +20 digit)
14 99.99 V 250V ±(0.2% of rdg +20 digit)
15 700.0V 700V ±(0.3% of rdg +20 digit
 
Code
5
Ranges Display
adjustable
Input Protection Accuracy (23ºC ±>5ºC, 35~85% RH) order on line
21 99.99 uA offset ± 9999
Full scale
0 to ± 9999

10 mA ±(0.5% of rdg +20 digit) base price
no output
$356.00
22 999.9 uA 10mA
23 9.999 mA offset ± 9999
Full scale
0 to ± 9999

50 mA ±(0.5% of rdg +20 digit)
24 99.99 mA 500 mA ±(0.5% of rdg +20 digit)
 
Code
6
Ranges Display
adjustable
input
protection
Accuracy (23ºC ±>5ºC, 35~85% RH) order on line
25 999.9 mA offset ± 9999
Full scale
0 to ± 9999
3 A ±(0.7% of rdg +20 digit) base price no output $380.00
26 5A 8A ±(0.7% of rdg +20 digit)
 
 
Resistance
Code 7 Range Display
adjustable
Circuit Current Accuracy (23ºC ±>5ºC, 35~85% RH)
11 99.99 Ohms offset ± 9999
Full scale
0 to ± 9999

~ 5 mA ±(0.1% of rdg + 4digit) base price
no output
$352.00
12 999.9 Ohms ~ 0.5 mA
13 9.999 KOhms ~ 50 uA
14 99.99KOhms ~ 5 uA


Output Modules
Analog Output (isolated from input (LO))
Any display range to output analog signal can be set
Output Method PWM
Scaling Digital Scaling
Output Resistive load Accuracy
23 degs C +/- 5 degs
Ripple
0 to 1 V > 10 KOhms +/- 0.5% full scale 50 mV p-p
0 to 10 V > 10 KOhms
1 to 5 V > 10 KOhms
4 - 20 mA less than 550 Ohms 25 mV p-p
 
External Control

Start/Hold : Shorted between COM terminal and start/hold terminal or same level --> hold Open COM terminal and start/hold terminal or 5 V --> start
D. ZERO : Shorted between COM terminal and D.ZERO terminal --> ON
P.HOLD : Shorted between COM terminal and P. HOLD terminal --> ON
R.RE (relay reset) : Shorted between COM terminal and R.RE terminal --> ON
P.SEL1 to 3 : as below

pattern 1 pattern 2 pattern 3 pattern 4 pattern 5 pattern 6 pattern 7 pattern 8
P.SEL1
OFF ON OFF ON OFF ON OFF ON
P.SEL2 OFF OFF ON ON OFF OFF ON ON
P.SEL3 OFF OFF OFF OFF ON ON ON ON
ON : Shorted between COM terminal and P.SEL terminal or same level
OFF : Open between COM terminal and P.SEL terminal or 5 V


Hi - Lo Set Point with relay output module
Control Method Computation by microcomputer
Measuring range
comparison
high/Low limit setting including polarity, -9999 to + 9999
Setting condition By sampling period
No setting condition for set value
Comparison Conditions  
Indication > High setpoint HI
High set point >/= indication>/= Lo Set point GO
Indication< Lo set point LO
Comparison Relay
contact capacity
240 Volts AC 8A resistive load
30 Volts DC 8 A resistive load
Photo-coupler output sink current 20 mA max )less than 30 V.
Output saturation voltage < 1.2 Volts at 20 mA
Hysteresis Settable from 1 to 9999 digits for each comparison set value
      
RS232 output module for A6000 DPM
Communication method Full duplex
Synchronous method Start and Stop
Transmission speed /4800/9600/19200/38400 bps
Start Bit 1 Bit
Data length 7 Bit /8 Bit
Error detection Even /odd parity
Stop Bit 1 / 2 Bits
Character Code ASC II
Transmission control none
 
RS485 output module for A6000 DPM
Communication method Full Duplex
Synchronous method Start and Stop
Transmission speed /4800/9600/19200/38400 bps
Start Bit 1 Bit
Data length 7/8 Bit
Parity Even/odd parity
Error detection BCC (Block Check Character) Check sum
Stop Bit 1/2Bits
Character Code ASC II
Transmission control none
Signal Name Signal Direction
Non-reversible output + Input/output
Reversible output - Input/output
Number of connectable meters Up to 31 units
cable length up to 500 m in total
   
Ordering Information
A6-x-y-A-bc Construct the part numbers by adding the numbers below. The base prices given above include the input board for the ranges shown as well as a single display and an AC power supply board. OR configure online in the store
Affix x select main board power (How the unit is going to be powered)
1=AC 100-240V (standard AC outlet )
2=DC 12-48V
Add
$0
$28
 
Affix y

Select Display 
1= multiple display for Hi/Lo set point

2= single display 

Add
1=$37
2=$0
Affix A
You can click on a code to configure and purchase online.

Select Input type
Code 1 =DC Voltage ± 99.99 mV - 99.99 V - 700V
Code 2 = DC Current ±99.99 uA - 99.99 mA
Code 3 = DC Current ±9.999 mA±2A
Code 4 = AC Voltage RMS 99.99 mV - 700V
Code 5 = AC Current RMS 99.9 uA - 99.99mA
Code 6 = AC Current RMS 999.9 mA - 5A
Code 7 = Resistance Meter
Code 8 =Thermocouple
Code 9 = Tachometer
Code A = Strain
Code B = Process/Comparatorl

Other Meters( A6000)
Code 9 Tachometer
Codes 8 Temperature

Code A Strain gage

see
base
prices
above

Affix b Comparator Output:
0. none
1. Relay
2. Photocoupler
Add
0=$0
1=$46
2=$31

Affix c

Select Output Type:
0 = None
1 =External Control
2 = BCD Output (TTL)
3 = BCD Output (open collector)
4 = Analong Output
5 = RS-232C
6 = RS-485
7 = RS-232C, analog output
8 = RS-485, analog output

Add
0=$0
1= $46
2 = $77
3 = $77
4 = $42
5= $86
6 = $110
7= $138
8= $153

 

Topac Inc. 231 CJC Highway, Suite 103 Cohasset MA 02025 USA
Tel: 781 740 8778 Fax: 781 740 8779
e-mail: sales@topac.com

| Home | E-mail | Online store | Inquiry form | Related |

This is a world wide web document page design layout and HTML code copyright ©2002-2014 by Topac Inc. - ALL RIGHTS RESERVED